GrassProtecta™ grass protection mesh is supplied on 6.56ft x 65.6ft (2m x 20m) & 3.28ft x 32.8ft (1m x 10m) rolls in two thicknesses 0.55 & 0.45 inches (11mm & 14mm) as determined by the application. The grass stabilization mesh is manufactured from HDPE polyethylene (Approx 20% recycled polymer)

Installation is simple; After cutting the grass short, the grass protection mesh is unrolled and secured to the surface using metal U-Pins or plastic fixing pegs. By allowing the grass to grow through the plastic mesh apertures, GrassProtecta™ grass stabilzer mesh allows the grass blade to intertwine with the plastic mesh filaments creating a strong, discreetly reinforced grass surface capable of withstanding vehicle loads, limiting damage and reducing soil compaction. GrassProtecta™ can also be installed onto newly landscaped areas with the soil seeded as required. Installation and design specifications are available by downloading the relevant document on the left or by contacting us directly.

GrassProtecta™ is ideal for golf cart routes / paths and grass car parking lots

Boddingtons strongly advises that GrassProtecta™ turf protection mesh, that has been installed onto an existing grass surface, remains unused until the grass has grown through the plastic net and a strong interlock has been achieved. This could be after a few weeks during the growing season or up to a few months (up to 8 months) out of the growing season depending on your location. This is to allow the grass to fully grow through the grass reinforcement mesh and allow the grass blade to create the strong interlock with the mesh strands. If the surface is used immediately grass growth may take a longer period of time and may limit the effectiveness of the product.

Product Specification